Lee Precision Case Length Gauge And Shellholder 40 S&W 90154 734307901547

The Lee Case Length Gage is a precise and easy way to trim brass cases to length and square the case mouth. Requires a Lee Cutter and Lock Stud to function. The first step to successfully trimming brass cases with the Lee Case Length Gage and Shellholder is to take the Lee Lock Stud (sold separately) and screw it into the shell holder. Next the Length Gage needs to be screwed into the Case Trimmer Cutter (sold separately). The length gage is set to cut each case within SAAMI specifications. After the tools are screwed together the next step is case trimming. Just put the empty brass into the shellholder, insert the case length gage into the empty piece of brass and turn the cutter until the piece of brass is trimmed to the predetermined length. It is that easy to get consistent case lengths and square case mouths helping to keep reloaded ammunition as accurate as possible.

Lee 90154 Case Length Gauge and
Shellholder 40 S&W
Each Shippable: No
Inner Pack Shippable: No
Master Pack Shippable: No
Model: 90154
Options: 40S&W
Prop 65 Cancer Causing Chemical: Lead
Prop 65 Detail: WARNING: This product may contain steel alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov. To prevent exposure, do not alter the product by welding, grinding, etc.
Prop 65 Item: Yes
Prop 65 Labeled: Yes
Prop 65 Reproductive Harming Chemical: Lead
Prop 65 Settlement: No
Prop 65 Short Form Label on Product: Cancer & Reproductive Harm
Reloading Tool Type: Shell Holder

Specifications